CS 5000™ Walk-Through Metal Detector
PN 1167410 / 1167420
MSRP: $4,495.00 DON'T PAY THIS HIGH PRICE!
Now Only $2995.00 Each
- 3 for $2695.00 Each
and Save BIG - For A Quick Response Cell or Text 361-255-9300
Key Features - Detailed
Product Report Here
- Microprocessor technology in detection and control circuitry—includes
20 standard application programs.
- Overhead control unit: LCD, alarm light, LED bar graph and
control touchpads—plus all wiring, connections and electronics—are
integrated into a single overhead compartment to eliminate exposure
of wires and the external control box.
- Uniform coverage from archway to floor.
- Greater sensitivity for detecting metal weapons—maximum of
200 distinct sensitivity levels.
- Continuous online report of operating status.
- Tamper proof settings through computerized access codes.
- Three levels of ankle-boost sensitivity.
- Self diagnostic program: complete and automatic.
- Noise reduction to prevent false alarms.
- Rugged, lightweight design for simple maintenance and easy
- Easy assembly: designed with only four (4) pieces and eight
(8) screws. Simple-to-follow instructions.
- Optional battery pack for use anywhere; provides up to 20
hours of backup.
- Limited 24-month warranty: parts and labor.
Operating: -4º F (-20º C) to +140º F (60º
C) Humidity to 95% non condensing Storage: -40º F (-40º
C) to 158º F (70º C)
Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 55 watts; no rewiring,
switching or adjustments required. Power supply meets UL, CSA,
TUV and VDE standards.
Weatherproofing / Foreign Object Protection Standards
Meets IP 31, IEC Standard. "Degrees of Protection provided
by Enclosures," IEC 529.
100% sensor coil Faraday shielding; special Garrett built-in circuitry
for noise suppression and ignoring x-ray monitor horizontal sync.
Built-in and resettable with current reading available on LCD
Multiple channels permit several CS 5000s and other Garrett detectors
to operate simultaneously in close proximity.
Ready light indicates unit is operational; alarm lights and audible
alarms are activated when the target amount of metal is detected;
LED bar graph indicates amplitude of alarm signal.
Dual-level access codes required to set or change all sensitivity
settings and detection programs; one level for use by supervisors
in selecting programs and sensitivity and the other for initial
set-up and overall control; non-resettable sequence code logs
all changes made whenever sensitivity codes are accessed. An audible
alarm reports unauthorized attempts at access.
Improves analysis of detection signal; increases throughput; helps
eliminate "false alarms" and also provides accurate
Solid state switches (low voltage AC or DC) for operating external
alarms and control devices.
Programs designed to eliminate the problem of dissimilar targets
canceling each other.
Attractive scratch and mar-resistant laminate with resilient end
caps; control panel and cross members made of heavy duty aluminum.
24 months, parts and labor
Garrett Electronics, Inc. ("Garrett") warrants
that each piece of security equipment manufactured by Garrett
is protected by the following limited parts and labor warranty
for a period of 24 (twenty-four) months (the "Warranty").
During this 24-month period Garrett will inspect and evaluate
all equipment returned to its authorized repair station or factory
to determine if the equipment meets Garrett's performance specifications.
Garrett will repair or replace at no charge to the owner all parts
determined faulty. This Warranty does not cover batteries nor
any and all failures caused by abuse, tampering, theft, failure
due to weather, battery acid or other contaminants and equipment
repairs made by an unauthorized party.
Passageway Interior Size
Width 30" (0.76 m)
Height 80" (2.03 m)
Depth 23" (0.58 m)
Overall Exterior Size
Width 35" (0.90 m)
Height 87" (2.21 m)
Depth 23" (0.58 m)
Width 35.5" (0.90 m)
Height 91.5" (2.32 m)
Depth 6.25" (.16 m)
Shipping Weight: 135 lbs. (61.2 kg)